| Place of Origin: | China |
| Brand Name: | CEC TANKS |
| Certification: | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
| Model Number: | W20160127005 |
| Minimum Order Quantity: | 1set |
| Price: | $5000~$20000 one set |
| Packaging Details: | PE poly-foam between each two steel plates ; wooden pallet and wooden box |
| Delivery Time: | 0-60 days after deposit received |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 60 sets per month |
|
Detail Information |
|||
A fire water tank in Finland is a dedicated reserve that supplies sprinklers, hydrants or monitors for the agreed fire strategy, and it is sized from the hydraulic demand rather than from a rule of thumb. In Finland the specification adds a rescue-service approval route and a severe-cold freeze margin that can decide whether the reserve is actually available in winter. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and hot-dip galvanized bolted tanks engineered for water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the compliance-first specification baseline a Finnish fire-water project should work from.
How A Finnish Fire-Water Reserve Is SizedA fire-water tank is not sized by a round number. The design flow and duration come from the hazard classification and the sprinkler or hydrant hydraulic calculation, to which a hose allowance and a reserve margin are added. Usable volume is the band between the minimum suction level and the top working level - dead volume below the suction point and freeboard do not count. In a Finnish winter the available volume also depends on freeze protection: a tank that ices over or whose intake freezes is not a reserve, whatever its nameplate capacity.
For a fire-water tank in Finland the governing reference is EN 12845 for automatic sprinkler systems, applied with the conditions of the local rescue service (pelastuslaitos) and the building permit route under the Land Use and Building Act. The authority having jurisdiction confirms the reserve volume, the pump arrangement, the suction connection and site access for fire appliances. Where the tank also forms part of an environmental-permit installation, volume and discharge are screened under the Environmental Protection Act. Agree the standard basis, the definition of usable volume and the acceptance test with the pelastuslaitos before ordering.
A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.
Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or frost margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.
Design parameter |
Typical value or range |
Why it matters |
Design flow |
Site-specific L/s |
Sets pump and suction sizing |
Fire duration |
From hazard classification |
Flow x duration sets base volume |
Hose allowance |
Agreed with authority |
Added to sprinkler demand |
Usable level band |
Min suction to top working level |
Dead volume and freeboard excluded |
Reserve margin |
Agreed % or volume |
Covers refill delay and uncertainty |
Freeze protection |
Site-specific cold-climate design |
Guarantees winter availability |
Coating thickness |
0.25-0.45 mm enamel / 180-280 um FBE |
Idle-water surface integrity |
Spark test |
1,500 V DC per panel |
Holiday verification |
Design lifecycle |
30-50 years |
Long-standby reserve duty |
The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country or Nordic region. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Finland/Norway/Denmark/Nordic fire-water project for this specific duty, and no in-country delivery at all in Norway, Denmark or Finland. Where a real fire-protection tank exists it is cited as the closest analogue, never as the named geography's application. This reference demonstrates the ability to engineer large coated and bolted water tanks for demanding duty, not a claim about this specific application or location. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.
Project |
Country |
Tank type |
Volume |
Year |
Relevance |
Guatemala fire-protection tanks |
Guatemala |
GFS bolted tank |
2 tanks, 598 m3 total |
2024 |
Real fire-water tanks (capability, not a Finland fire project) |
Fix the fire strategy and hydraulic basis first, then issue a schedule that states design flow, duration, hose allowance, usable level band and reserve margin. Require the supplier to show the usable-volume calculation, not just the shell capacity, and to document the lining thickness, adhesion and spark-test record. In Finland make freeze protection an explicit acceptance item and agree the reserve and access conditions with the pelastuslaitos before placing the order.
It supplies sprinklers, hydrants or monitors from a dedicated reserve sized to the agreed fire strategy and hydraulic demand.
How is a fire-water tank sized?From design flow and duration set by the hazard classification, plus hose allowance and reserve margin - usable volume excludes dead level and freeboard.
Which standard applies in Finland?EN 12845 for automatic sprinkler systems where applicable, applied with the local rescue-service (pelastuslaitos) conditions and the building permit route.
Who signs off a fire-water tank in Finland?The local pelastuslaitos confirms reserve volume, pump and suction arrangement, site access and acceptance testing.
Does freeze protection matter?Yes - in a Finnish winter the reserve is only available if the tank, intakes and appurtenances are protected against freezing.
Which construction suits a fire reserve?GFS enamel for inert standby water, FBE or hot-dip galvanized for specified or cost-sensitive duty.
What coating evidence should the supplier provide?Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS and 100 percent 1,500 V DC spark testing per panel.
Can makeup water share the fire tank?Only with separately assigned volumes and documented isolation; the control and water-quality requirements are different.
What is the ex-works lead time for a bolted fire tank?About 30 days ex-works for a 1,000-10,000 m3 vessel, with on-site bolted erection in weeks.
How long does a fire-water tank last?A 30-50 year shell lifecycle is expected under standby duty, with the lining and intake hardware driving maintenance.
Should the warranty cover the lining?Yes - the lining should be warranted separately for a long-standby reserve.
What single tank has Center Enamel built largest?A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.
Is the cited project a Finnish fire delivery?No - it is a real fire-protection tank cited as capability evidence, not a claimed Finland fire-water project.
Does Center Enamel build fire-water tanks for Finland?Yes - GFS, FBE and galvanized bolted tanks with the coating and usable-volume documentation a rescue-service review requires.
Why does usable volume differ from shell capacity?Because water below the suction point and above the working level cannot be drawn for the fire demand, and freeze or access constraints can reduce it further.
ConclusionA fire-water tank in Finland is sized from the hydraulic demand and an agreed EN 12845 basis, with usable capacity set by the level band and winter availability by freeze protection. Fix the fire strategy and agree reserve and access with the pelastuslaitos before ordering.
Suggested CTA: Fix the fire strategy and require a usable-volume and freeze-protection calculation before ordering a Finland fire-water tank.