Chilled Water Storage Tank Norway: Stratified Buffer And Peak Shaving

Product Details
Place of Origin: China
Brand Name: CEC TANKS
Certification: ISO 9001:2008, AWWA D103 , OSHA , BSCI
Model Number: J2016012323
Payment & Shipping Terms
Minimum Order Quantity: 1set
Price: $5000~$20000 one set
Packaging Details: PE poly-foam between each two steel plates ; wooden pallet and wooden box
Delivery Time: 0-60 days after deposit received
Payment Terms: L/C,T/T
Supply Ability: 60 sets per month

Detail Information

Place of Origin China Brand Name CEC TANKS
Certification ISO 9001:2008, AWWA D103 , OSHA , BSCI Model Number J2016012323
Permeability: Gas / Liquid Impermeable Steel Plates Thickness: 3mm - 12mm , Depends On The Diameter & Height
Hardness: 6.0 ( Mohs ) Adhesion: 3,450 N/cm
Service Life: Over 30 Years Capacity: 20 K3 - 18,000 M3
Highlight:

stratified chilled water tank

,

buffer tank peak shaving

,

industrial water storage tank

Product Description

Chilled Water Storage Tank Norway: Stratified Buffer And Peak Shaving

A chilled-water storage tank in Norway is a stratified vessel that stores cold water made off-peak and releases it during peak cooling hours, letting a plant shift electricity demand and defer chiller capacity. Although Norway's cooling load is smaller than in southern Europe, data centres, industry and district-cooling schemes increasingly use cold storage for peak shaving and resilience, and the cold climate adds an insulation and freeze dimension. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and stainless bolted tanks engineered for water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the specification baseline a Norwegian chilled-water project should work from.

How A Chilled-Water Store Shaves Peak Load

A stratified chilled-water tank holds cold water at the bottom and warmer return water at the top. Charging runs chillers at night or during low-cost, low-carbon hours; discharging meets the cooling peak. The useful volume is the band that stays cold before the thermocline degrades. Diffuser geometry and inlet velocity decide how sharp that thermocline stays, so a buyer should treat stratification as a specification item. In a Norwegian setting the charge strategy must also account for low ambient temperatures and, for an outdoor tank, freeze protection of the water and appurtenances.

  • Charge off-peak, discharge during the cooling peak.
  • Peak-hour cooling deficit sets the required volume.
  • A sharp thermocline keeps the stored cold usable.
  • Diffuser and inlet geometry decide stratification quality.
Norwegian Compliance And Interface Points

For a chilled-water storage tank in Norway the shell and siting fall under the Planning and Building Act (Plan- og bygningsloven) and TEK17, with the permit or notification route set by the municipality. A closed chilled loop is normally a process-contact system, so potable-contact rules apply mainly at the makeup connection to the public supply, where backflow protection is required and drinking-water rules and EU 1935/2004 may apply. Water abstraction or discharge can trigger NVE and the water regulations. The local fire service (brannvesen) sets access and separation. Confirm each with the authority having jurisdiction at concept stage.

  • Confirm Plan- og bygningsloven and TEK17 with the municipality.
  • Check NVE and water-regulation triggers.
  • Backflow-protect the makeup connection to the public supply.
  • Agree access and separation with the local brannvesen.
Tank Materials And Construction

A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.

  • GFS bolted: inert enamel, low roughness, no field recoating.
  • FBE bolted: documented epoxy lining for a specified duty.
  • Hot-dip galvanized: lower cost, zinc shell protection.
  • Stainless 304/316 for low-mineral or pressure-vessel duty.
Design Parameters And Specification Baseline

Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or frost margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.

Design parameter

Typical value or range

Why it matters

Peak duty / flow

Site-specific m3/h or kW

Sets drawdown, refill and diffuser design

Separated duty volumes

Makeup + process + reserve

Prevents quality cross-contamination

Potable-contact option

NSF/ANSI 61 / EU 1935/2004

Required where water feeds a human-use system

Backflow protection

Isolated, verified connections

Protects the public supply

Coating thickness

0.25-0.45 mm enamel / 180-280 um FBE

Idle-water surface integrity

Adhesion

above 3,450 N/cm2 (GFS)

Lining integrity on drawdown

Spark test

1,500 V DC per panel

Holiday verification

Design lifecycle

30-50 years

Standby-plus-cyclic water duty

Freeze / frost margin

Site-specific cold climate

Protects shell, roof and appurtenances

Project Case Study: Verified Capability Reference

The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country or Nordic region. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Finland/Norway/Denmark/Nordic fire-water project for this specific duty, and no in-country delivery at all in Norway, Denmark or Finland. Where a real fire-protection tank exists it is cited as the closest analogue, never as the named geography's application. This reference demonstrates the ability to engineer large coated and bolted water tanks for demanding duty, not a claim about this specific application or location. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.

Project

Country

Tank type

Volume

Year

Relevance

Nicaragua potable-water battery

Nicaragua

GFS bolted tank

2 tanks, 4,957 m3 total

2024

Real water battery (capability, not a Norway chilled-water project)

How To Specify A Norwegian Chilled-Water Tank

Issue a duty schedule that states the peak cooling deficit, the hours of peak to cover, the supply temperature and the achievable charge window, then ask the supplier to show the volume and diffuser design that deliver it. In Norway add the cold-climate envelope explicitly: insulation, freeze margin, roof and appurtenance detail. Require coating thickness, adhesion and spark-test records, and keep the documentation permit-ready for the municipality and any NVE review.

  • State peak deficit, cover hours and supply temperature.
  • Check the chiller and low-carbon charge window.
  • Require a thermocline and diffuser strategy with the volume quote.
  • Define insulation and freeze margin for Norwegian conditions.
Frequently Asked Questions
What is a chilled-water storage tank in Norway used for?

It stores cold water made off-peak and releases it at the cooling peak, shaving demand and deferring chiller capacity in a Norwegian plant or district-cooling system.

How is the tank volume set?

From the peak-hour cooling deficit and the hours to cover, then checked against the temperature swing and stratification quality.

Which rules apply to a chilled-water tank in Norway?

The Planning and Building Act and TEK17, possible NVE water-regulation triggers, potable and backflow rules at makeup, and local fire-service conditions.

Is a chilled-water tank a potable system?

Usually no - a closed chiller loop is a process-contact system; potable rules apply mainly at the makeup connection to the public supply.

Which construction suits chilled-water duty?

GFS enamel for inert idle water, FBE for a specified duty, or stainless where the fluid is low-mineral and a fabricated vessel is preferred.

Why does stratification matter?

A sharp thermocline keeps stored cold usable; a mixed store delivers warm water long before the geometric volume is empty.

What coating evidence should the supplier provide?

Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS and 100 percent 1,500 V DC spark testing per panel.

How does the Norwegian climate affect the design?

It drives insulation, freeze margin and appurtenance detail, and shapes the charge strategy for an outdoor or unheated tank.

What is the ex-works lead time for a bolted chilled tank?

About 30 days ex-works for a 1,000-10,000 m3 vessel, with bolted erection on site in weeks.

How long does a chilled-water tank last?

A 30-50 year shell lifecycle is expected, with the lining and diffuser internals driving maintenance.

Should the warranty cover the lining?

Yes - the lining should be warranted separately because cycling stresses the coating more than the shell.

What single tank has Center Enamel built largest?

A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.

Is the cited project a Norwegian chilled-water delivery?

No - it is a real water tank cited as capability evidence, not a claimed Norway chilled-water project.

Does Center Enamel build chilled-water tanks for Norway?

Yes - GFS, FBE and stainless bolted tanks sized from the real duty with documentable lining and cold-climate construction records.

Can the chiller always charge the store overnight?

Only if its off-peak capacity and window can deliver the required charge; check this against the duty schedule before sizing.

Conclusion

A chilled-water storage tank in Norway is sized from the peak deficit and cover hours, with usable capacity set by stratification and a real cold-climate envelope. Check the charge window, demand lining evidence and keep documentation permit-ready.

Suggested CTA: State peak deficit, cover hours and freeze margin, and require a stratification strategy before ordering a Norway chilled-water tank.

Want to Know more details about this product
Please enter your inquiry details.
Shijiazhuang Zhengzhong Technology Co., Ltd
sales@cectank.com
86-20-34061629
Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Leave a Message
*Email
*Message
Send
China Good Quality Glass Fused To Steel Tanks Supplier. Copyright © 2016-2026 cectanks.com . All Rights Reserved.
Send Message