Fire Water Tank Italy: EN 12845 And Vigili Del Fuoco Approval

Product Details
Place of Origin: China
Brand Name: CEC TANKS
Certification: ISO 9001:2008, AWWA D103 , OSHA , BSCI
Model Number: W
Payment & Shipping Terms
Minimum Order Quantity: 1set
Price: $5000~$20000 one set
Packaging Details: PE poly-foam between each two steel plates ; wooden pallet and wooden
Delivery Time: 10-30 days after deposit received
Payment Terms: L/C,T/T
Supply Ability: 60 sets per month

Detail Information

Place of Origin China Brand Name CEC TANKS
Certification ISO 9001:2008, AWWA D103 , OSHA , BSCI Model Number W
Tank Material: Glass Fused To Steel Foundation: Concrete Or Glass Fused Steel
Steel Plates Thickness: 3mm To 12mm , Depends On The Tank Structure Size Of Panel: 2.4M * 1.2M
Easy To Clean: Smooth, Glossy, Inert, Anti-adhesion Permeability: Gas / Liquid Impermeable
Highlight:

EN 12845 fire water tank

,

Vigili Del Fuoco approved water tank

,

industrial fire water tank Italy

Product Description

Fire Water Tank Italy: EN 12845 And Vigili Del Fuoco Approval

A fire water tank in Italy is a dedicated reserve that supplies sprinklers, hydrants or monitors for the agreed fire scenario, and it is judged on one thing above all: whether the required volume stays available at the required flow when the Vigili del Fuoco checks it. Italian fire protection is commonly specified to the EN 12845 automatic-sprinkler basis, with the local fire brigade as the approving authority and the insurer involved where one exists. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and galvanized bolted tanks engineered for fire reserve duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the demand-led specification baseline an Italian fire-water project should work from.

How An Italian Fire-Water Reserve Is Sized

A fire-water tank is not sized by rule of thumb. The design flow and duration come from the hazard classification and the sprinkler or hydrant hydraulic calculation, and the tank must hold that volume above the level at which the pumps lose suction. That remaining gap - the difference between the usable low level and the outlet - is where many undersized installations fail an acceptance check. A robust Italian specification states the design flow, the required duration, the unusable residue and the refill arrangement as separate, verifiable numbers, with a seismic check where the site requires one.

  • Design flow and duration come from the hazard calculation.
  • Usable volume excludes the dead level below the suction point.
  • Refill rate must sustain the demand for the agreed duration.
  • Seismic conditions can govern the shell and anchorage.
Italian Approval Route And Standard Basis

For a fire water tank in Italy the usual reference is EN 12845 for automatic sprinkler installations, adopted through UNI-EN, together with the requirements of the Vigili del Fuoco and any insurer. NFPA 22 may apply where the US basis is explicitly chosen. There is no single Italian fire-water tank code that replaces an agreed design basis, so the specifier should record the basis in writing. Italian water law, the building framework and regional civil-protection rules frame siting, bunding and seismic design. Confirm the approval route before the shell is ordered.

  • Fix the design basis (EN 12845 or an accepted alternative) in writing.
  • Confirm Vigili del Fuoco and insurer acceptance early.
  • UNI-EN adoption is common; NFPA 22 only if explicitly adopted.
  • Check water-law, building and seismic conditions for siting.
Tank Materials And Construction

A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and the shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.

  • GFS bolted: inert enamel, low roughness, no field recoating.
  • FBE bolted: documented epoxy lining for a specified duty.
  • Hot-dip galvanized: lower cost, zinc shell protection.
  • Stainless 304/316 for low-mineral or pressure-vessel duty.
Design Parameters And Specification Baseline

Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or seismic margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.

Design parameter

Typical value or range

Why it matters

Design flow

Site-specific m3/h or L/min

Drives the hydraulic calculation

Fire duration

Minutes or hours by hazard

Sets the required usable volume

Usable level band

Between outlet and low-level mark

Excludes unusable dead volume

Refill arrangement

Mains or pump with verified rate

Sustains demand during the event

Seismic basis

Site-specific where required

Governs anchorage and appurtenances

Coating thickness

0.25-0.45 mm enamel / 180-280 um FBE

Idle-water surface integrity

Adhesion

above 3,450 N/cm2 (GFS)

Lining integrity at low level

Spark test

1,500 V DC per panel

Holiday verification

Project Case Study: Verified Capability Reference

The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Belgium/Poland/Italy/Sweden/Finland fire-water tank project for this specific duty; where a real in-country tank exists it is cited as the closest analogue, never as the named application. Poland, Finland and Belgium have no in-country project entries in the available source at all. This reference demonstrates the ability to engineer large coated and bolted water tanks for demanding duty, not a claim about this specific application or geography. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.

Project

Country

Tank type

Volume

Year

Relevance

Singapore fire-protection tank battery

Singapore

GFS bolted tank

2 tanks, 1,666 m3 total

2026

Real fire-water battery (capability, not an Italy delivery)

How To Specify An Italian Fire-Water Tank

Issue the fire strategy first: design flow, duration, hazard classification, usable level band and refill method. Then require the supplier to show how the shell, outlet and internal finish preserve that usable volume over a long standby life, including the seismic and anchorage detail where the site requires it. Reject a quote based only on geometric capacity, because an acceptance check measures available water at the outlet. Keep the lining and coating records ready and record the chosen standard basis in the documentation pack.

  • State design flow, duration and hazard classification.
  • Define the usable level band and the dead volume explicitly.
  • Require coating thickness, adhesion and spark-test records.
  • Record the agreed standard basis in the acceptance pack.
Frequently Asked Questions
What is a fire water tank in Italy used for?

It holds a dedicated reserve for sprinklers, hydrants or monitors and must deliver the design flow for the agreed duration when checked.

How is a fire-water tank sized?

From the hazard-based hydraulic calculation: design flow multiplied by required duration, with the unusable dead volume added back and the refill rate checked.

Which standard applies in Italy?

EN 12845 is the common basis, adopted through UNI-EN, with the Vigili del Fuoco and any insurer as approving parties; NFPA 22 applies only if explicitly adopted.

Who approves an Italian fire-water installation?

The local Vigili del Fuoco, together with the insurer where one is involved and the chosen design basis.

Does seismic design matter in Italy?

Yes - in seismic zones the site conditions can govern the shell, anchorage and appurtenances of a fire-water tank.

Which construction suits fire reserve duty?

GFS enamel for inert standby water, FBE for a specified duty, and galvanized where a lower-cost zinc-protected shell is acceptable.

How is usable volume different from geometric volume?

Usable volume excludes water below the suction outlet that the pump cannot draw - an acceptance check measures usable water, not nameplate capacity.

What coating evidence should the supplier provide?

Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS and 100 percent 1,500 V DC spark testing per panel.

Does the tank need freeze protection in Italy?

Most Italian sites do not need a severe freeze margin, but alpine or high-altitude locations should confirm the local winter design temperature.

What is the ex-works lead time for a bolted fire tank?

About 30 days ex-works for a 1,000-10,000 m3 vessel, with bolted erection on site in weeks.

How long does a fire-water tank last?

A 30-50 year shell lifecycle is expected under standby duty, with the lining and outlets driving maintenance.

Should the warranty cover the lining?

Yes - the lining should be warranted separately because long standby and occasional drawdown stress the coating.

What single tank has Center Enamel built largest?

A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.

Is the cited Singapore project an Italian fire delivery?

No - it is a real fire-water tank battery cited as capability evidence, not a claimed Italy project.

Why do installations fail an acceptance check?

Usually because usable volume was overstated - the design ignored the dead level below the suction point or the refill could not sustain the demand.

Conclusion

A fire water tank in Italy is sized from the hydraulic demand and an agreed EN 12845 or alternative basis, with usable - not geometric - volume as the acceptance criterion. Define the level band, check seismic needs and demand lining evidence.

Suggested CTA: Fix the fire strategy and require a usable-volume calculation before ordering an Italy fire-water tank.

Want to Know more details about this product
Please enter your inquiry details.
Shijiazhuang Zhengzhong Technology Co., Ltd
sales@cectank.com
86-20-34061629
Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Leave a Message
*Email
*Message
Send
China Good Quality Glass Fused To Steel Tanks Supplier. Copyright © 2016-2026 cectanks.com . All Rights Reserved.
Send Message