| Place of Origin: | China |
| Brand Name: | CEC TANKS |
| Certification: | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
| Model Number: | W |
| Minimum Order Quantity: | 1set |
| Price: | $5000~$20000 one set |
| Packaging Details: | PE poly-foam between each two steel plates ; wooden pallet and wooden |
| Delivery Time: | 10-30 days after deposit received |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 60 sets per month |
|
Detail Information |
|||
A data center water tank in the Nordics is a storage vessel that holds evaporated-cooling makeup, process top-up or an isolated fire reserve for a colocation or hyperscale site in Sweden, Norway, Finland or Denmark. The region's data-centre growth meets a fragmented regulatory map: there is no single Nordic water authority, so abstraction, discharge and potable-contact questions are answered under national frameworks. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and stainless bolted tanks engineered for water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the cross-border specification baseline a Nordic data-centre programme should work from.
A single water tank on a data-centre site may serve three distinct duties: evaporated-cooling makeup, closed-loop or process top-up, and a fire reserve held under separate control. Treating them as one undifferentiated volume is the most common specification error, because the potable-contact and backflow requirements differ between a makeup line and a fire line. The correct approach assigns a defined volume and a documented isolation point to each duty, then sizes the shell for the sum while keeping the quality boundaries explicit. For a multi-site Nordic portfolio the duty schedule becomes the common template applied at every site.
· Makeup water replaces evaporation and blowdown losses.
· Process or closed-loop top-up needs low-mineral, controlled water.
· Fire reserve is isolated and sized to the fire hydraulic demand.
· Use one duty schedule as the common Nordic template.
For a data-center water tank in the Nordics the water and permit questions are national. Sweden applies the Planning and Building Act and the Environmental Code; Norway applies Plan- og bygningsloven, TEK17 and NVE for water abstraction and discharge; Finland applies the Land Use and Building Act and Environmental Protection Act permitting; Denmark applies BR18 and the Environmental Protection Act. Materials for water intended for human consumption are commonly specified to EU framework Regulation 1935/2004 and a recognised scheme such as NSF/ANSI 61 where a potable claim is made, with backflow protection at the public-supply connection. Fire and access conditions come from each national authority. Confirm the path at every site.
· SE: PBL / Environmental Code; NO: TEK17 / NVE.
· FI: Building Act / Environmental Protection Act; DK: BR18.
· Confirm EU 1935/2004 and potable-contact approval per site.
· Backflow-protect makeup; fire conditions per national authority.
A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.
· GFS bolted: inert enamel, low roughness, no field recoating.
· FBE bolted: documented epoxy lining for a specified duty.
· Hot-dip galvanized: lower cost, zinc shell protection.
· Stainless 304/316 for low-mineral or pressure-vessel duty.
Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or frost margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.
|
Design parameter |
Typical value or range |
Why it matters |
|
Peak duty / flow |
Site-specific m3/h or kW |
Sets drawdown, refill and diffuser design |
|
Separated duty volumes |
Makeup + process + reserve |
Prevents quality cross-contamination |
|
Potable-contact option |
NSF/ANSI 61 / EU 1935/2004 |
Required where water feeds a human-use system |
|
Backflow protection |
Isolated, verified connections |
Protects the public supply |
|
Coating thickness |
0.25-0.45 mm enamel / 180-280 um FBE |
Idle-water surface integrity |
|
Adhesion |
above 3,450 N/cm2 (GFS) |
Lining integrity on drawdown |
|
Spark test |
1,500 V DC per panel |
Holiday verification |
|
Design lifecycle |
30-50 years |
Standby-plus-cyclic water duty |
|
Freeze / frost margin |
Site-specific cold climate |
Protects shell, roof and appurtenances |
The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country or Nordic region. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Finland/Norway/Denmark/Nordic fire-water project for this specific duty, and no in-country delivery at all in Norway, Denmark or Finland. Where a real fire-protection tank exists it is cited as the closest analogue, never as the named geography's application. This reference demonstrates the ability to engineer large coated and bolted water tanks for demanding duty, not a claim about this specific application or location. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.
|
Project |
Country |
Tank type |
Volume |
Year |
Relevance |
|
Ecuador potable-water tank |
Ecuador |
GFS bolted tank |
1 tank, 892 m3 |
2022 |
Real potable-water tank (capability, not a Nordic data-center project) |
Issue a duty schedule that names each stored volume, its water quality, its refill and drawdown rates and its isolation point, then require the supplier to demonstrate the lining system, coating thickness, adhesion and spark-test record. Reject a proposal that quotes only a geometric volume with no link to the makeup balance or the fire demand. For a Nordic programme add the frost and siting basis at each site, and keep the documentation sufficient for the national permit review wherever the tank lands.
· Issue a per-duty volume and water-quality schedule.
· Require coating thickness, adhesion and spark-test records.
· Tie tank size to the makeup balance and fire demand.
· Keep documentation adaptable to each national authority.
It can hold evaporated-cooling makeup, process or closed-loop top-up water, and an isolated fire reserve - each a separate volume with its own quality and isolation requirements.
Each national authority: Sweden via PBL and the Environmental Code, Norway via TEK17 and NVE, Finland via the Building and Environmental Protection Acts, Denmark via BR18 and environmental rules.
No - EU framework rules such as 1935/2004 inform materials, but approvals and enforcement are national; confirm the scheme at each site.
Only with separately assigned volumes and documented isolation and backflow protection; the control and water-quality requirements differ.
GFS enamel for inert standby water, FBE or galvanized for specified or cost-sensitive duty, and stainless where the fluid is low-mineral.
From the makeup peak flow and drawdown/refill balance plus the separately calculated fire reserve - not from a generic rule of thumb.
Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS, and 100 percent 1,500 V DC spark testing per panel.
Yes - a cold climate drives insulation, freeze margin, siting and appurtenance detail for outdoor or unheated tanks.
About 30 days ex-works for a 1,000-10,000 m3 vessel, with on-site bolted erection in weeks.
A 30-50 year shell lifecycle is expected; the lining drives the maintenance interval under cyclic water duty.
Yes - the lining should be warranted separately because water chemistry and drawdown cycles stress the coating more than the shell.
A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.
No - it is a real potable-water tank cited as capability evidence, not a claimed Nordic data-center water project.
Yes - GFS, FBE and stainless bolted tanks with documentable lining and construction records adaptable to each national permit.
Tank design, lining, instrumentation and the duty schedule; permits, potable approvals and fire conditions stay national.
A data-center water tank in the Nordics is specified around national water and building rules, EU-informed potable-contact requirements and a clean separation of makeup, process and fire volumes. Use one duty schedule across sites, localise the permit and design for frost.
Suggested CTA: Issue a per-duty water schedule and map the national water authority at each Nordic site before ordering a data-center water tank.