| Place of Origin: | CHINA |
| Brand Name: | CEC TANKS |
| Certification: | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
| Model Number: | W20180508003 |
| Minimum Order Quantity: | 1 SET |
| Price: | $5000~$20000 one set |
| Packaging Details: | PE poly-foam between each two steel plates;wooden pallets and wooden box |
| Delivery Time: | 10-30 days after deposit received |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 60 sets per month |
|
Detail Information |
|||
A data center water tank in Spain holds makeup water for evaporative cooling, process or closed-loop top-up, and a fire reserve for a Spanish hyperscale or colocation site. Spain's water-stress regions make water accounting a sensitive permitting issue, and EU drinking-water rules govern any tank that feeds a human-use system. The specification is therefore built around separated duty volumes, potable-contact evidence and a fire reserve the local authority accepts. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and stainless bolted tanks engineered for water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the compliance-first baseline a Spanish data-center water project should work from.
A Spanish data-center water tank typically serves three duties with different water quality and control needs. Evaporative makeup replaces losses and may be reclaimed or potable; closed-loop top-up needs low-mineral controlled water; the fire reserve is held isolated and sized to the fire hydraulic demand. The correct design assigns a defined volume and an isolation point to each duty, sizes the shell for the sum, and keeps the quality boundaries documented so the operator can prove what each cubic metre is for.
Where the stored water feeds a human-use system, materials in contact with it are commonly specified to EU framework Regulation 1935/2004 with an appropriate potable-contact approval such as NSF/ANSI 61 or an equivalent member-state scheme. The Spanish national building code (CTE) and the local fire service set fire reserve and access conditions, while river-basin and regional water authorities control abstraction and discharge in water-stress areas. Confirm each with the authority having jurisdiction at concept stage, and record the metering and isolation arrangement the operator will use to demonstrate compliance.
A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and the shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.
Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or seismic margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.
Design parameter |
Typical value or range |
Why it matters |
Makeup peak flow |
Site-specific m3/h |
Sets drawdown and refill |
Separated duty volumes |
Makeup + process + fire |
Prevents quality cross-over |
Potable-contact option |
NSF/ANSI 61 / EU 1935/2004 |
Where water feeds human use |
Backflow protection |
Isolated, verified connections |
Protects the public supply |
Coating thickness |
0.25-0.45 mm enamel / 180-280 um FBE |
Idle-water surface integrity |
Adhesion |
above 3,450 N/cm2 (GFS) |
Lining integrity on drawdown |
Spark test |
1,500 V DC per panel |
Holiday verification |
Design lifecycle |
30-50 years |
Standby-plus-cyclic water duty |
The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Netherlands/Spain/France/UK/Belgium fire-water tank project for this specific duty; where a real in-country tank exists it is cited as the closest analogue, never as the named application. This reference demonstrates the ability to engineer large coated, stainless and bolted water tanks for demanding duty, not a claim about this specific application or geography. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.
Project |
Country |
Tank type |
Volume |
Year |
Relevance |
Panama drinking-water battery |
Panama |
GFS bolted tank + aluminum dome |
3 tanks, 4,956 m3 total |
2025 |
Real potable-water project (capability analogue, not Spain data-center water) |
Issue a duty schedule naming each stored volume, its water quality, its refill and drawdown rates and its isolation point, then require the supplier to demonstrate the lining system, coating thickness, adhesion and spark-test record. Reject a bid that quotes only a geometric volume with no link to the makeup balance or the fire demand. In Spain's regulated water environment, the winning specification is the one that lets the operator prove potable-contact and fire compliance to the authority from the tank documentation alone.
Evaporative-cooling makeup, closed-loop or process top-up water, and an isolated fire reserve - each a separate volume with distinct quality and control requirements.
Where water feeds a human-use system, materials are commonly specified to EU 1935/2004 with an approval such as NSF/ANSI 61 or an equivalent member-state scheme.
River-basin and regional water authorities set abstraction and discharge terms, which is especially relevant in Spain's water-stress regions.
Only with separately assigned volumes and documented isolation and backflow protection, since the quality and control requirements differ.
GFS enamel for inert standby water, FBE or galvanized for specified or cost-sensitive duty, and stainless where the fluid is low-mineral.
From the makeup peak flow and drawdown/refill balance plus the separately calculated fire reserve.
Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS and 100 percent 1,500 V DC spark testing per panel.
Yes - a documented, isolated connection and control so the reserve cannot be drawn down by the cooling or process system.
About 30 days ex-works for a 1,000-10,000 m3 vessel, with bolted erection on site in weeks.
A 30-50 year shell lifecycle, with the lining driving the maintenance interval under cyclic water duty.
Yes - the lining should be warranted separately because water chemistry and drawdown stress the coating more than the shell.
A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.
No - it is a real drinking-water project cited as manufacturing-capability evidence, not a claimed Spain data-center water project.
Yes - GFS, FBE and stainless bolted tanks with potable-contact and construction documentation suitable for an authority review.
Because regional water authorities regulate abstraction in water-stress areas, and the operator must be able to account for every cubic metre drawn and discharged.
A data-center water tank in Spain is specified around EU potable-contact rules, regional water accounting and a separated, authority-accepted fire reserve. Issue a per-duty volume schedule, demand lining evidence and keep the compliance file authority-ready.
Suggested CTA: Issue a separated per-duty water schedule and require EU potable-contact and lining evidence before ordering a Spain data-center water tank.