| Place of Origin: | China |
| Brand Name: | CEC TANKS |
| Certification: | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
| Model Number: | W20160901001 |
| Minimum Order Quantity: | 1set |
| Price: | $5000~$20000 one set |
| Packaging Details: | PE poly-foam between each two steel plates ; wooden pallet and wooden box |
| Delivery Time: | 0-60 days after deposit received |
| Payment Terms: | L/C,T/T |
| Supply Ability: | 60 sets per month |
|
Detail Information |
|||
A data center water tank in the Netherlands is a storage vessel that holds makeup water, process water or a fire reserve for a Dutch hyperscale or colocation site, and the specification is shaped less by the tank catalogue than by the water-board permit and the potable-contact rules that apply to the site. A Dutch data center draws a large, steady makeup flow yet sits under a provincial water authority (waterschap) that controls abstraction and discharge, so the tank is the point where the site proves it can buffer, isolate and account for every cubic metre. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and stainless bolted tanks engineered for water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the compliance-first specification baseline a Netherlands project should work from.
A single water tank on a Dutch data-center site may serve three distinct duties: evaporated-cooling makeup, closed-loop or process top-up, and a fire reserve held under separate control. Treating them as one undifferentiated volume is the most common specification error, because the potable-contact and backflow requirements differ between a makeup line and a fire line. The correct approach assigns a defined volume and a documented isolation point to each duty, then sizes the shell for the sum while keeping the quality boundaries explicit.
For a Netherlands data-center water tank the provincial water board controls abstraction and discharge permits, while EU and national drinking-water rules govern any tank that feeds potable or makeup water used on site. Materials in contact with water intended for human consumption are commonly specified to EU framework Regulation 1935/2004 and, where a potable claim is made, to a recognised scheme such as NSF/ANSI 61 or an equivalent member-state approval. The Dutch building regulations and the local fire authority set the reserve and access requirements. These are the questions to put to the authority having jurisdiction at concept stage, not after the tank is ordered.
A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and the shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.
Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or seismic margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.
| Design parameter | Typical value or range | Why it matters |
|---|---|---|
| Makeup peak flow | Site-specific m3/h | Sets drawdown and refill rate |
| Separated duty volumes | Makeup + process + fire | Prevents quality cross-contamination |
| Potable-contact option | NSF/ANSI 61 / EU 1935/2004 | Required where water feeds human-use system |
| Backflow protection | Isolated, verified connections | Protects the public supply |
| Coating thickness | 0.25-0.45 mm enamel / 180-280 um FBE | Idle-water surface integrity |
| Adhesion | above 3,450 N/cm2 (GFS) | Lining integrity on drawdown |
| Spark test | 1,500 V DC per panel | Holiday verification |
| Design lifecycle | 30-50 years | Standby-plus-cyclic water duty |
The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Netherlands/Spain/France/UK/Belgium fire-water tank project for this specific duty; where a real in-country tank exists it is cited as the closest analogue, never as the named application. This reference demonstrates the ability to engineer large coated, stainless and bolted water tanks for demanding duty, not a claim about this specific application or geography. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.
| Project | Country | Tank type | Volume | Year | Relevance |
|---|---|---|---|---|---|
| Canada industrial-water battery | Canada | GFS bolted tank | 8 tanks, 6,595 m3 total | 2025 | Real industrial water battery (capability, not NL data-center water) |
Issue a duty schedule that names each stored volume, its water quality, its refill and drawdown rates and its isolation point, then require the supplier to demonstrate the lining system, coating thickness, adhesion and spark-test record. Reject a proposal that quotes only a geometric volume with no link to the makeup balance or the fire demand. Because the Netherlands sits in a regulated water district, the winning specification is the one that lets the operator prove compliance to the water board and the fire authority from the tank documentation alone.
It can hold evaporated-cooling makeup, process or closed-loop top-up water, and an isolated fire reserve - each a separate volume with its own quality and isolation requirements.
The provincial water board (waterschap) controls abstraction and discharge permits, so the tank must support the site's permitted water balance and accounting.
Where the stored water feeds a system used for human consumption, materials are commonly specified to EU 1935/2004 and an approved scheme such as NSF/ANSI 61 or an equivalent member-state approval.
They can share a shell only with separately assigned volumes and documented isolation and backflow protection; the water-quality and control requirements are different.
GFS enamel for inert standby water, FBE or galvanized for specified or cost-sensitive duty, and stainless where the fluid is low-mineral or a pressure-vessel build is preferred.
From the makeup peak flow and drawdown/refill balance plus the separately calculated fire reserve - not from a generic rule of thumb.
Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS, and 100 percent 1,500 V DC spark testing per panel.
Yes - the design must include the site-specific freeze margin for an outdoor or unheated tank, plus the roof and appurtenance detail that goes with it.
About 30 days ex-works for a 1,000-10,000 m3 vessel, with on-site bolted erection in weeks rather than months.
A 30-50 year shell lifecycle is expected; the lining, not the steel, drives the maintenance interval under cyclic water duty.
Yes - the lining should be warranted separately because water chemistry and drawdown cycles stress the coating more than the shell.
A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.
No - it is a real industrial water battery cited as manufacturing-capability evidence, not a claimed Netherlands data-center water project.
Yes - GFS, FBE and stainless bolted tanks with the coating documentation and permit-ready records a Dutch water-board review requires.
Because makeup, process and fire water have different quality and backflow requirements, and merging them makes compliance to the water board and fire authority hard to demonstrate.
A data-center water tank in the Netherlands is specified around the water-board permit, EU and Dutch potable-contact rules and a clean separation of makeup, process and fire volumes. Size it from the real water balance, demand lining and coating evidence, and keep the documentation permit-ready.
Suggested CTA: Issue a per-duty water schedule and require documentable lining and coating evidence before ordering a Netherlands data-center water tank.