EN 12845 Water Storage Tank: European Sprinkler Compliance

Product Details
Place of Origin: China
Brand Name: CEC TANKS
Certification: ISO 9001:2008, AWWA D103 , OSHA , BSCI
Model Number: W
Payment & Shipping Terms
Minimum Order Quantity: 1set
Price: $5000~$20000 one set
Packaging Details: PE poly-foam between each two steel plates ; wooden pallet and wooden
Delivery Time: 10-30 days after deposit received
Payment Terms: L/C,T/T
Supply Ability: 60 sets per month

Detail Information

Place of Origin China Brand Name CEC TANKS
Certification ISO 9001:2008, AWWA D103 , OSHA , BSCI Model Number W
Feature: Eco-friendly, Durability Tank Material: Glass Fused To Steel
Chemical Resistance: Excellent Size Of Panel: 2.4M * 1.2M
Easy To Clean: Smooth, Glossy, Inert, Anti-adhesion Capactiy Available: 20 M3 To 20,000 M3
Highlight:

EN 12845 water storage tank

,

sprinkler compliance water tank

,

industrial water storage tank

Product Description

Chilled Water Storage Tank Spain: Stratified Buffer And Peak Shaving

Target Keywords: chilled water storage tank Spain, chilled water tank Spain, chilled water storage tank in Spain, Spain chilled water storage tank supplier, chilled water buffer tank Spain

Target Meta Title: Chilled Water Storage Tank Spain | Center Enamel

Target Meta Description: Size a chilled-water storage tank in Spain from the peak-shaving duty, stratification quality and documentable tank construction.

A chilled-water storage tank in Spain is a stratified vessel that stores cold water produced off-peak and releases it during the hot afternoon peak, letting a plant shave electrical demand and defer chiller capacity. Spain's cooling season and high solar generation make afternoon peak shaving attractive, and the tank is the component that turns cheap midday or night-time cooling into a dispatchable reserve. Center Enamel supplies Glass-Fused-to-Steel, Fusion-Bonded Epoxy and stainless bolted tanks engineered for chilled-water duty, with more than 30,000 installed tank projects across 100-plus countries. This article sets out the duty-led specification baseline a Spanish chilled-water project should work from.

How A Chilled-Water Store Shaves Peak Load

A stratified chilled-water tank holds cold water at the bottom and returns warmer water at the top. Charging runs chillers at night or during low-cost solar hours to fill the tank; discharging serves the building or process load during the peak without starting additional chillers. The economic value is the avoided peak chiller capacity and demand charge, so the tank is sized from the peak-hour cooling deficit and the number of hours to be covered, not from a rule of thumb.

  • Charge off-peak, discharge during the afternoon peak.
  • Peak-hour cooling deficit sets the required volume.
  • A sharp thermocline keeps the stored cold usable.
  • Diffusers and inlet geometry decide stratification quality.
Spanish Compliance And Interface Points

For a chilled-water storage tank in Spain the applicable framework is the UNE-EN tank and water-contact family together with the CTE building code and the local fire authority, plus EU energy-efficiency policy where the storage supports a regulated efficiency measure. A closed chilled-water loop usually needs a process-contact specification rather than a potable approval, but the makeup connection must be backflow-protected and documented. Confirm the structural loading, the fire separation and the energy-measurement point with the authority having jurisdiction before the tank is ordered.

  • Confirm UNE-EN construction and water-contact requirements.
  • Confirm CTE building and local fire-service conditions.
  • Backflow-protect the makeup connection to the chilled loop.
  • Agree the energy-metering point for any efficiency measure.
Tank Materials And Construction

A thermal store, chilled-water buffer, data-center water reservoir or fire reserve sits idle or cycles slowly for most of its life, so the internal finish and the shell discipline matter more than the nameplate rating. Glass-Fused-to-Steel panels are fired at 820-930 degrees C to give a smooth inert skin at 0.25-0.45 mm thickness, adhesion above 3,450 N/cm2 and 100 percent 1,500 V DC spark testing per panel. Fusion-Bonded Epoxy bolted tanks (Resicoat R4-ES interior 180-280 micrometres, Interpon D2015 exterior 150-250 micrometres, adhesion above 16 MPa) and hot-dip galvanized bolted tanks cover specified or cost-sensitive duties. Stainless 304 or 316 is chosen where the fluid is low-mineral or a factory-fabricated vessel is preferred. The caveat is that lining choice follows fluid chemistry and code duty, so the specifier should confirm pH, chloride load and pressure class rather than assume one construction fits every duty.

  • GFS bolted: inert enamel, low roughness, no field recoating.
  • FBE bolted: documented epoxy lining for a specified duty.
  • Hot-dip galvanized: lower cost, zinc shell protection.
  • Stainless 304/316 for low-mineral or pressure-vessel duty.
Design Parameters And Specification Baseline

Sizing starts from the real duty calculation - thermal charge/discharge profile, chilled-water temperature swing, makeup and process balance, or fire hydraulic demand - not from a catalogue number. The coating thickness of 0.25-0.45 mm for GFS or 180-280 micrometres for FBE, a 30-50 year tank lifecycle, the NSF/ANSI 61 or WRAS potable-contact option where relevant, and the local freeze or seismic margin then set the shell, roof and appurtenances. Every figure below is checked against the applicable standard and the authority having jurisdiction in the destination country.

Design parameter

Typical value or range

Why it matters

Peak cooling deficit

Site-specific kW or MW

Sets the discharge duty

Peak hours covered

Hours per day

Derives stored volume

Supply/return temperature

Chilled-water delta-T

Defines usable cold

Thermocline target

Sharp interface

Preserves usable volume

Coating thickness

0.25-0.45 mm enamel / 180-280 um FBE

Idle-surface integrity

Adhesion

above 3,450 N/cm2 (GFS)

Lining integrity on cycling

Spark test

1,500 V DC per panel

Holiday verification

Design lifecycle

30-50 years

Daily charge/discharge duty

Project Case Study: Verified Capability Reference

The figure below is a REAL Center Enamel delivery cited here as manufacturing-capability evidence for the tank type discussed, NOT as a claimed thermal-energy-storage, chilled-water, data-center water or fire-water delivery in the named country. Center Enamel's verified project record (case_library.csv) holds no dedicated TES, chilled-water, data-center-water or Netherlands/Spain/France/UK/Belgium fire-water tank project for this specific duty; where a real in-country tank exists it is cited as the closest analogue, never as the named application. This reference demonstrates the ability to engineer large coated, stainless and bolted water tanks for demanding duty, not a claim about this specific application or geography. Where the source did not record a diameter or height, the field reads Not Provided and is never estimated.

Project

Country

Tank type

Volume

Year

Relevance

Italy municipal-water GFS tank

Italy

GFS bolted tank

198 m3

2025

Real European water tank (capability analogue, not a chilled store)

How To Specify A Spanish Chilled-Water Store

Require a duty schedule with the peak-hour cooling deficit, the hours to be covered and the supply/return temperatures, then ask the supplier to show the volume and diffuser design that deliver that duty. Reject a bid that quotes a volume with no thermocline or inlet-stratification detail, because poor mixing can cut usable cold dramatically. Keep the lining evidence and the UNE-EN and CTE documentation ready for review, and define the metering approach if the tank supports an efficiency claim.

  • State peak deficit, hours covered and supply/return temperatures.
  • Require thermocline and diffuser design with the volume quote.
  • Demand coating thickness, adhesion and spark-test records.
  • Document the makeup backflow protection and metering point.
Frequently Asked Questions
What is a chilled-water storage tank in Spain?

A stratified tank that stores cold water made off-peak and releases it during the hot afternoon peak, shaving electrical demand and deferring chiller capacity.

How is the tank sized?

From the peak-hour cooling deficit and the number of peak hours to cover, checked against the supply/return temperature band - not from a generic factor.

Why does stratification matter?

A sharp thermocline keeps cold water separate from returning warm water, preserving the usable stored cold; poor mixing cuts effective capacity.

Does the tank need potable-contact approval?

A closed chilled loop usually needs a process-contact specification, though the makeup connection must be backflow-protected and documented.

Which standards apply in Spain?

The UNE-EN tank and water-contact family, the CTE building code and local fire-service conditions, plus EU efficiency policy where the storage supports a measured measure.

Which construction suits chilled-water duty?

GFS enamel for inert idle water, FBE for a specified duty, or stainless where the fluid is low-mineral and a fabricated vessel is preferred.

What coating evidence should the supplier provide?

Thickness (0.25-0.45 mm for GFS or 180-280 micrometres for FBE), adhesion above 3,450 N/cm2 for GFS and 100 percent 1,500 V DC spark testing per panel.

Can it work with solar generation?

Yes - charging during low-cost midday solar hours and discharging into the evening peak is a common peak-shaving pattern in Spain.

What is the ex-works lead time?

About 30 days ex-works for a 1,000-10,000 m3 vessel, with on-site bolted erection in weeks.

How long does the tank last?

A 30-50 year shell lifecycle is expected, with the lining and diffuser internals driving the maintenance interval under daily cycling.

Should the warranty cover the lining?

Yes - the lining should be warranted separately because daily thermal cycling stresses it more than the shell.

What single tank has Center Enamel built largest?

A verified single shell of 20,000 m3 was delivered in 2016, setting the upper bound for one bolted tank.

Is the cited Italy project a Spanish chilled store?

No - it is a real Italian water tank cited as a European manufacturing-capability analogue, not a claimed Spanish chilled-water delivery.

Does Center Enamel build chilled-water tanks for Spain?

Yes - GFS, FBE and stainless bolted tanks sized from the real peak-shaving duty with documentable lining and construction records.

Why defer chiller capacity with a tank?

Because a tank covers the few peak hours with stored cold, letting the plant avoid buying chillers that would run only briefly at low utilisation.

Conclusion

A chilled-water storage tank in Spain is sized from the peak-hour cooling deficit and hours covered, with usable cold set by stratification rather than nameplate volume. Require a thermocline and diffuser strategy, documentable lining and an authority-ready compliance file.

Suggested CTA: State peak deficit, covered hours and supply/return temperatures, and require a stratification strategy before ordering a Spain chilled-water tank.

Want to Know more details about this product
Please enter your inquiry details.
Shijiazhuang Zhengzhong Technology Co., Ltd
sales@cectank.com
86-20-34061629
Fuli Commercial Center room 301#, Xingang West Rd.11#, Haizhu area, Guangzhou, Guangdong province, China.
Leave a Message
*Email
*Message
Send
China Good Quality Glass Fused To Steel Tanks Supplier. Copyright © 2016-2026 cectanks.com . All Rights Reserved.
Send Message