|
Product Details:
Payment & Shipping Terms:
|
| Capacity: | 20 M3 To 18,000 M3 | Coating Thickness: | 0.25mm~0.40mm , Two Layer Of Coating Internal And External |
|---|---|---|---|
| Color: | Customized | Foundation: | Concrete Or Glass Fused Steel |
| Roof Available: | Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof | Chemical Resistance: | Excellent |
| High Light: | water treatment tank,wastewater treatment digester |
||
Gfs Waste Water Storage Tanks With Excellent Acid And Alkali Proof
Introduction of GFS waste water storage tank
Glass fused to steel (GFS) tank is the bolted tank fused with enamel frits and ART enamel special steel sheet, the fusibility between the enamel frit and steel sheet is excellent, which is unlike other tank their coating just sit on the surface of the steel. The construction time of GFS tank is short ,while the maintenance cost of it is little.
About the installation, usually we install the tank from the top ring to bottom ring, one by one. We use jack or steel pole to do the installation, there is no need any big equipment during the construction. Sealant and bolts will be used, in the junction place of the steel sheet, we will apply with sealant to prevent and leakage.
With it’s excellent corrosion resistance of glass, as well as it’s flexibility and strength of steel, the service life of GFS tank is more than 30 years, which is widely applied to waste water treatment, drinking water storage and biogas projects.
Specification of GFS tank
| Coating color | dark blue, dark green , white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm , depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coating internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet , around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds |
Optional roof of GFS tank
* Glass fused to steel roof (air tightness roof)
* Aluminum deck roof
* Aluminum geodesic roof
* Single membrane roof
* Double membrane roof (air tightness roof)
* Glass reinforced polyester roof
Why would you select Center as your supplier ?
1. With rich experience: we have nearly 30 years experience in enameling industry, we produce not only glass fused to steel tank but also enamel frits by ourselves. With more than 200 patents on enamel frit formulas. We could customize the product according to the request of our customers.
2. With professional R&D department: senior engineer with more than 50 years’ experience in enameling researching
3. With strictly quality control: Raw materials test, recipe finalizing small sample test, middle stage product test, destructive test, holiday test to make sure the quality of our tank
4. With professional after-sales team: no matter where you are we have professional after-sales team to serve you .
5. Meet with international standard: our production line has passed the ISO 9001:2008 international quality system certificate, our design comply with AWWA D103-09, OSHA, ISO28765 and series Australian standards.
6. With advanced production line: now we are the only one to use the automatic production line in this enameling industry in China, it is not only greatly improve our quality, but also greatly fall down the cost of our tank
Contact Person: Miss.Melody wong
Tel: +8615013092031
