With the development of modern industry, the discharge of industrial wastewater is increasing. Industrial wastewater is known as one of the most difficult treated wastewater, especially industrial wastewater with high organic concentration and high salt content.
Industrial wastewater is divided into pharmaceutical wastewater, brewing wastewater, textile wastewater, and papermaking wastewater. Different types of industrial wastewater have different water quality, water quantity, and organic content due to different production processes and production methods. However, in general, industrial wastewater mainly includes these characteristics of huge volume, many kinds, the water quality is complex and the variation range is large, and the treatment is difficult, the salt content is high, and it has strong corrosiveness. Therefore, an appropriate storage tank needs to be selected as an industrial wastewater storage tank.
As the first and most experienced Glass-Fused-to-Steel tanks Manufacturer in the Asian, our Glass-Fused-to-Steel tank has the advantages of the short construction cycle, superior corrosion resistance, low cost, convenient installation, beautiful appearance, and other advantages. Our GFS tanks are widely used as brewery wastewater storage tanks, textile wastewater storage tanks, papermaking wastewater storage tanks, etc. In addition, according to the characteristics of strong corrosiveness and high salt content of industrial wastewater, Center Enamel has made a special anti-corrosion design for the structure of the GFS tank to ensure the safety of the storage tank during use and has specially developed storage for high-salt wastewater. The required anti-corrosion and high wear-resistant storage tanks improve the anti-corrosion performance of Glass-Fused-to-Steel tanks.
At present, Center Enamel's Glass-Fused-to-Steel tanks have been applied and verified in industrial wastewater treatment projects in many countries and regions around the world, and have won the trust and recognition of many customers. The following are some examples of industrial wastewater treatment projects.
Textile Industry Parks Wastewater Treatment Project
Project Details 23 tanks for 3 textile industrial parks WWTP at Adama, Dire Dawa and Addis Ababa
Dongguan Papermaking Wastewater Treatment Project
Installation: September 2018
Project Location: Dongguan, Guangdong
Tank type: denitrification reactor
1 set of tank Φ12.22 * 18 m
1 set of tank Φ13.75 * 12 m
1 set of tank Φ15.29 * 16.8 m
Coco-Cola Plant Wastewater Treatment Project
Location Bandar Enstek, Seremban, Malaysia
Tank Quantity 2 sets of GFS tanks
EGSB tank with enamel roof Ø7.64*17.4M
Adjusting tank with aluminum deck roof Ø9.17*16.8M
Installation October 2016