Payment & Shipping Terms:
|Steel Plates Thickness:||3mm To 12mm , Depends On The Tank Structure||Usage:||Waste Water Treatment , Sewage Treatment, Effluent Treatment, Ect.|
|Capactiy Available:||20 M3 To 18,000 M3||Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14|
|Roof Available:||Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof|
Anaerobic Digester Glass lined to Steel Construction Tanks in Biogas / Wastewater Treatment by Center Enamel
What is Anaerobic Digester Glass Lined to steel Tanks?
Glass-Fused-to-Steel (GFS), also known as Glass-Lined-Steel (GLS), enamel tanks, these names all means the same thing, is two materials - Enamel frit and raw steel are fused together after two coating and two heat treatment at 800-900℃ to achieve the best cohesion blending of the strength and flexibility of steel combined with the corrosion resistance of glass.
|Coating Color||Dark green, or Customizing colors|
|Coating Thickness||0.25~0.40mm, double coating|
|Acid and alkalinity proof||Standard pH: 3~11, Special pH: 1~14|
|Elastic||Same as steel sheet, around 500kN/mm|
|Service life||≥30 Years|
|Permeability||Gas liquid impermeable|
Installation: Quick and Easy
When you need a Superior Tank, you'll have it. Within days after you place your order, we'll be rolling up to prepare the job-site for construction. And because all our tanks parts are standardized and interchangeable, it means that most jobs go up without a hitch.
What's more, you can have a Superior Tank just about any way you want it, low and wide, high and narrow, with or without cone bottoms, and with a variety of special appurtenances. They can be erected inside buildings, or on elevated structures. They can be added to for greater capacity, and individual parts and sections are easily replaced.
The precision fabrication of Superior Tanks give you perfectly matched segments for safe dependable storage.
Construction: Tough and Ready
Our bolted steel tanks are designed, engineered and built to take punishment. Decks feature a steel rafter construction and rugged center post support in accordance with AWWA D103-09 standards for even longer life aluminum or fiberglass decks are also available.
Our rubber gaskets are manufactured to exacting specifications to meet virtually any storage need from potable water to crude oil, gasoline and edible oils. Gaskets are accurately pre-punched with bolts slightly smaller than the bolts, preventing leakage along the threads and insuring a tight, leak-proof seal.
All tanks are available with either flush or extended cleanout openings. On the flush design, the cover plate bolts directly to the stave, the extended cleanout fastens a three-inch extension to the stave to which the cover plate is bolted.
Walks and ladders on Superior Bolted Storage Tanks conform to all OSHA requirements.
Coatings : Durability and Chemical Resistance
Superior has adapted the most advanced coating technology available in bolted tank manufacturing.
Powder Coatings are electrostatically applied and then cured at high temperatures for greater film thickness to achieve adequate bonding and coverage, resulting in added chemical resistance to corrosion, chipping and scratching and other abuses, along with faster turn around time and greater control of thickness and hardness. Our Powder Coatings are NSF 61 approved and they meet all AWWA and FDA standards. Superior also features hot-dipped galvanized tanks.
Superior Tanks: Safe and Sound
Meticulous design and engineering, rigidly controlled manufacturing, and careful field erection all contribute to a superior final product and a tank that will do its job with minimal attention for decades to come.
But there's more to Superior than just our tanks. There's our service. If any problems arise, you can count on us to be back and make all necessary repairs... FAST. All our tanks come guaranteed.
We stand behind our tanks. So you can turn your back on them.
Who we are?
Center Enamel Co., Ltd was established in 1989, is the pioneer and the largest manufacturer of glass fused to steel tanks in China. CEC Engaged in enamel industry for more than 20 years, focused on enamel frit R&D and achieved more than 200 patents of enamel frit formulas.
- 1*Technical Consultant
National technical expert; Senior engineer; over 50 years enameling R&D experience
- 23*Advanced Technician
Postgraduate educational background; expert in enamel R&D over 10 years
- Raw material - enamel frit manufacturer
- CNC cutting machine for steel place
- Automatic enamel line for spray
- Raw Material Test: Raw material ingredient analysis, raw material impurity test and etc.
- Enamel Sample Test: Enamel fluidity test, color difference analysis, firing test, acid and alkali resistance test, adherence test
- Destructive Test: Impact test,holiday test, slice microscope analysis
- Numbering for each steel plate for tracking
Case location: Malaysia
Call us for all your Storage Tank, Wash Tank, and Special Treatment Tank Needs Serving the Potable Water, Fire Protection, Weste Water and Petroleum Industries.