|
Product Details:
Payment & Shipping Terms:
|
| Tank Material: | Glass Fused To Steel | Foundation: | Concrete Or Glass Fused Steel |
|---|---|---|---|
| Steel Grade: | ART 310 | Roof Available: | Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof |
| Corrosion Integrity: | Excellent | Chemical Resistance: | Excellent |
| Elastic: | Same As Steel Sheet ,around 500KN /mm | ||
| High Light: | GFS Potable Water Storage Tanks,FDA Potable Water Storage Tanks,500KN/mm Potable Water Storage Tanks |
||
Center Enamel provides GFS potable water storage tanks for the storage of safe drinking water, rainwater collection and collection, long-term storage of water, fire fighting and protection, and irrigation of farmland.
Melting glass into steel is quickly becoming the primary technology in today's storage tank industry. This process involves heating the steel to over 1500 degrees and then applying a layer of silica glass to form an enamel surface that never needs to be painted. It is ideal for storing drinking water, bulk materials, wastewater, and even biosolids. This type of storage tank is also called enamel storage tank, GFS storage tank, glass melting steel storage tank or glass welding bolt steel storage tank.
Our glass fused to steel tanks are FDA approved and are safe for human consumption. Whether your tank is used for drinking water storage, rainwater collection, ground water storage or emergency water supply system storage, our plastic tank can meet your needs.
GFS Potable Water Storage Tanks Specification
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater saltwater, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds |
The glass lined drinking water tank is modular in structure and can be designed with different diameters/heights according to different engineering requirements. This enables us to meet the various requirements of plant owners and contractors for tank size. The minimum tank capacity we can provide is 20m³,The maximum capacity of a single tank is up to 25,000 m³.
Center Enamel's drinking water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our drinking water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Glass Fused to Steel (GFS) Tank Advantages :
In combination with its modular design and construction concept SD Enviro’s Glass Fused to Steel Tanks finish offers a range of benefits including customers:
Long Life Span
Low Capital Cost
Low Maintenance Costs
Rapid Installation Times
Economic Worldwide Shipments
Flexibility to Re-model, Extend and Re-site
Optimum Corrosion Resistance
Contact Person: Miss.Melody wong
Tel: +8615013092031
