the fire-fighting water tank is the best Fire water storage solution
There are two main reasons for installing sprinkler systems: property protection or life safety. In both cases, their efficiency in control and fire suppression has protected lives and the environment for more than 120 years.
In both cases, their efficiency in control and fire suppression has protected life and the environment for more than 120 years, and it should be accepted that all sprinkler systems will protect life by limiting the spread of fire and protecting escape routes.
Property protection systems are usually installed at the request of the insurance company of the building occupant to protect the business by ensuring that the building and contents are protected from fire.
Some systems are installed to comply with building or fire regulations, mainly to protect employees, the public, and firefighters from fire risks. This type of system should be more accurately referred to as an "enhanced availability" sprinkler system, but is more commonly referred to as a "life safety" sprinkler system, and includes a series of additional features that can reduce the system's inability to operate due to the following reasons The possibility of regular service and maintenance.
In both cases, an important part of the system is the water supply. This can take the form of direct water supply from the local water supply main, with or without booster pumps, or, more reliably, storing the water in a tank with one or more pumps to deliver the water to the sprinkler system .
The most common arrangement is a single storage tank with two fire pumps, each capable of meeting the needs of the sprinkler system.
To improve reliability, the water storage tank can be split into two half-capacity water tanks. This ensures that water is always available for the sprinkler system, even when repairing or maintaining a tank (or any of its equipment).
fire water storage tank Specifications
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depends on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy yo clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
|
Comparison between GFS Tanks and Concrete Tanks
1. Easy Construction: All the tank shells of Glass-Fused-To-Steel Tanks are factory coated, can be easily assembled and installed in difficult conditions, to meet the urgency requirement of project, unlike Concrete Tanks will be affected seriously by bad weather and other factors.
2. Corrosion Resistance: Concrete tank would corroded through to reinforcing bar within 5 years of installation, Glass-Fused-To-Steel Tanks with 2 layer of Glass coating, can be applied for PH from 3 to 11, Center Enamel also provide 2 Years Warranty of its Glass-Fused-To-Steel Tanks.
3. Leakage and Maintenance: Concrete is susceptible to cracking so that many Concrete Tanks show signs of visible leaks and require substantial remedial maintenance, Glass-Fused-To-Steel Tanks are an excellent alternative with less maintenance due to the steel strong tension strength.
About Center Enamel Co., Ltd
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2021, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 90 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
