Payment & Shipping Terms:
|Coating Color:||Dark Green, Or Customizing Colors||Coating Thickness:||0.25~0.40mm, Double Coating|
|Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14||Adhesion:||3,450N/cm|
|Hardness:||6.0 Mohs||Holiday Test:||>1500V|
|Installation:||By Jacking Machine Or Steel Pole, Fast In Installation||Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion|
|Permeability:||Gas / Liquid Impermeable||Foundation:||Concrete Or Glass Fused Steel|
|Steel Grade:||ART 310||Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
|Impact Resistance:||Excellent||Capactiy Available:||20 M3 To 20,000 M3|
|Size Of Panel:||2.4M * 1.2M|
glass fused to steel water tanks,
above ground fuel storage tanks
Glass-Fused-to-Steel Drinking Water Storage Tanks From 500 Gallons to 4,000,000 Gallons
Glass-Fused-to-Steel drinking water storage tanks are made of Glass-Fused-to-Steel, special sealant, self-locking bolts, and other accessories. And among them, Glass-Fused-to-Steel is the most important part. Glass-Fused-to-Steel or Glass-Lined Steel combines the strength and flexibility of steel and the corrosion resistance of glass. The volume of Glass-Fused-to-Steel drinking water storage tank range from 500 gallons to 4,000,000 gallons. Center Enamel's Glass-Fused-to-Steel drinking water storage tank engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our GFS tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone, etc., to make sure the tank structure's adequate security in long-term service life.
Advantage of Glass-Fused-to-Steel drinking water storage tank
Flexible Sizing: With tank dimensions that are extremely flexible, Glass-Fused-to-Steel drinking water storage tank can be customized to meet the capacity and installation requirements of any project, and overcome site limitations.
Expansion Possibilities: Glass-Fused-to-Steel tanks can often be expanded to meet increased storage requirements, without the costs associated with adding a second tank.
Easy to Repair: When a part or accessory on a Glass-Fused-to-Steel drinking water storage tank fails, it can easily be unbolted and replaced, unlike other tanks, which require extensive labor to repair.
Factory Finished: The sections of a Glass-Fused-to-Steel drinking water storage tank are manufactured and finished offsite, reducing installation labor, waste, and pollution, as well as weather delays during construction.
Reduced Shipping Costs: Glass-Fused-to-Steel tanks are shipped disassembled, reducing shipping volume and costs.
Faster Installation: Glass-Fused-to-Steel drinking water storage tanks require about one third the installation time of a welded tank, reducing labor costs and allowing the tank to be put into service faster.
Center Enamel Co., Ltd was established in 1989, are the pioneer and the largest manufacturer of glass fused to steel tanks in China. CEC Engaged in enamel industry for more than 30 years, focused on enamel frit R&D and achieved more than 200 patents of enamel frit formulas. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. CEC Glass-Fused-to-Steel tanks are wildly used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.
Contact Person: Ms. melody wong