Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Adhesion:||3,450N/cm|
|Service Life:||≥30 Years||Steel Grade:||ART 310|
|Roof Available:||Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof||Size Of Panel:||2.4M * 1.2M|
|Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14||Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
|Capacity:||20 M³ To 18,000 M³||Installation:||By Jacking Machine Or Steel Pole, Fast In Installation|
commercial water storage tanks,
municipal water storage tanks
The relocated industrial wastewater storage tanks also call Glass-Fused-to-Steel tanks, are made of special steel plate, special sealant, self-locking bolt. That is why the industrial wastewater storage tanks can be dismantled, removed and relocated. The special steel plate is coated with two layers of enamel coating on both sides. After the heat polymerization, a strong binding force is formed between the coating and the steel plate, which make the Glass-Fused-to-Steel tanks have Good chemical and physical performance. All our Glass-Fused-to-Steel tank products are manufactured to meet or exceed common government regulations and industry standards: AWWA D103-09, OSHA, ISO/EN28765. So the relocated industrial wastewater storage tanks are very suitable for wastewater treatment engineering, including mixing tanks, flocculation tanks, sedimentation tanks and others.
All Center Enamel Glass-Fused-to-Steel tank’s capabilities can be expanded and relocated, which allow the factory to relocate the industrial wastewater storage tanks when the factory moving to another place. Center Enamel tank’s storage capacities are made flexible by adding or removing a ring of side staves. All tanks can be shipped worldwide in containers which reduce freight charges and allow for easier handling.
The advantages of our industrial wastewater storage tanks?
1. To improve the steel quality performance after enameling, we developed special steel ART310 with Angang Steel Group in 2005 which can greatly Increase not only the adhesive power between steel and enamel coating, but also solve fish scaling problem and improve the steel yield strength after firing.
2. We are the only one factory have the laser cutting machine in China that can greatly improve both the production and the quality of the glass-fused-to-steel water storage tank.
3. Our glass-fused-to-steel water storage tank and design reach AWWA D103-09 standard, OSHA and meet European standards.
4. We are the factory direct selling that can offer Glass-Fused-to-Steel wastewater storage tank at competitive prices.
5. We can customize various products according to customers’ different operating requirements.
Below is the detail comparison between various tank:
|Item||Concrete Tank||Carbon steel tank||Enamel tank
|Temperature adaption||A stress||
Adapt to low
Adapt to low
Adapt to low
|Shape||Any shape||Round shape||Round shape||Round shape|
|Ground Or underground||Both||Ground||Both||Ground|
|Corrosion resistance||Normal||No resistance to corrosion||Good||Not|
|Easy to clean||Bad||Bad||Good||Normal|
|Easy to repair||Normal||Good||Good||Bad|
|Weight (T)||heavy||Little heavy||light||Little light|
|Tank temperature protect||no||need||need||need|
|Annual anti-corrosive cost||no||High cost||no||High cost|
Contact Person: Miss.Melody wong