Place of Origin: | China |
Brand Name: | CEC TANKS |
Certification: | ISO 9001:2008, AWWA D103 , OSHA , BSCI |
Model Number: | J2016012106 |
Minimum Order Quantity: | 1set |
Price: | $5000~$20000 one set |
Packaging Details: | PE poly-foam between each two steel plates ; wooden pallet and wooden box |
Delivery Time: | 0-60 days after deposit received |
Payment Terms: | L/C, T/T |
Supply Ability: | 60 sets per month |
Detail Information |
|||
Place of Origin | China | Brand Name | CEC TANKS |
---|---|---|---|
Certification | ISO 9001:2008, AWWA D103 , OSHA , BSCI | Model Number | J2016012106 |
Corrosion Resistance: | Excellent ! Suitable For Waste Water Salt Water, Sea Water, High Sulfur Crude Oil, Salt Fox, Organic And Inorganic Compounds | Adhesion: | 3,450N/cm |
Hardness: | 6.0 Mohs | Elastic: | Same As Steel Sheet , Around 500KN/mm |
Coating Thickness: | 0.25mm - 0.4mm, Two Coating Internal And External | Steel Plates Thickness: | 3mm - 12mm , Depends On The Diameter & Height |
High Light: | glass fused to steel water tanks,above ground fuel storage tanks |
Bolted Type Glass Fused Steel Tank Used As Digester In Waste Water Treatment Application
Glass fused steel tank advantages
1. superior performance in corrosion resistance and against rust |
2. factory fabrication tank . No painting or spray on erection site |
3. minimal maintenance cost |
4. No need crane or other large equipment during erection. |
5. not subjected to severe weather and environment |
6. can be designed to future expansion, dismantle or re-movement. |
7. free service for technical drawings |
8. turn key service from proposal to tank commissioning |
Brief introduction of glass fused steel tank
Glass fused steel tank is a kind of factory fabrication tank made of glass coated on Ti-rich special steel
plates.The steel plates are coated with enamel powder and burned in oven which makes them superior
connectionwith both .
High recommended, we would cut holes on tank body in the workshop instead of on job site . And along with
flange nozzles according to hole.
Glass fused steel tank is usually installed by jacks from top to down . First, assembly the top ring, then lift
them up by the jacks ; then assembly the next ring .... till the bottom ring .
Glass fused steel tank is wide used in water supply and water treatment , power and energy, waste water
treatment, and dry bulk storage field .
Glass fused steel tank specifications
Coating color |
dark blue, dark green , white, and customized |
A standard steel plate size |
effective size 2400mm x 1200 m |
Steel plates thickness |
3mm - 12mm , depends on the diameter & height |
Coating thickness |
0.25mm - 0.4mm, two coating internal and external |
Acid and alkalinity proof |
standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
Adhesion |
3,450N/cm |
Elastic |
same as steel sheet , around 500KN/mm |
Hardness |
6.0 Mohs |
Service life |
>30 years |
Spark test |
>1500 V |
Permeability |
gas and liquid impermeable |
Easy yo clean |
smooth, glossy, inert, anti-adhesion |
Corrosion resistance |
excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds
|
Technology advantages :
Quality control
Roof options
Glass fused steel material roof
* gas - tight
* accommodate heavy loads from mixers and other equipment installed on roof
* gas and liquid impermeable
Aluminum sloped deck roof
* no gas - tight
* water treatment and waste water treatment
* economical
Glass reinforced polyester roof
* no gas - tight
* water treatment and waste water treatment
* economical
* dome shape roof
Single / double membrane roof
* tank mounted
* gas / liquid impermeable
* suits for low to moderate gas pressure
* center support pole is usually needed
Aluminum geodesic dome roof
* gas - tight
* suits for moderate pressure and vacuum design
* light load conditions
* roof is lightweight
* free - span
* corrosion resistant better than many other alloys
Manufacturing machine