Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Adhesion:||3,450N/cm|
|Service Life:||≥30 Years||Steel Grade:||ART 310|
|Roof Available:||Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof||Size Of Panel:||2.4M * 1.2M|
|Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14||Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
|Capactiy Available:||20 M3 To 20,000 M3||Feature:||Eco-friendly, Durability|
|Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion||Steel Plates Thickness:||3mm - 12mm , Depends On The Diameter & Height|
|Installation:||By Jacking Machine Or Steel Pole, Fast In Installation||Chemical Resistance:||Excellent|
Providing water to municipalities requires complex and well-designed storage and treatment systems, which are often the responsibility of government agencies. Municipal water tank is called potable water tank. Potable water is clean, potable, or filtered water that can be drunk by people.
Municipal water tanks must conform to specific guidelines or specifications based on municipal codes in the area. The design of Center Enamel municipal water storage tank conforms to AWWA D-103 and NSF standards. We will build storage tanks according to your specific requirements.And our storage tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Glass-Fused-to-Steel Municipal Water tanks are fusing two materials at 820°C-930°C high temperature to achieve the best properties of both the strength and flexibility of steel and the corrosion of resistance of glass. Glass-Fused-to-Steel Municipal Water tanks can provide many advantages over standard epoxy or welded painted storage tanks. Glass-Fused-to-Steel technology is the premium coating technology in the storage tanks market.
Glass Fused to Steel Municipal Water Tanks Specifications
|Coating color||dark blue, dark green, white, and customized|
|A standard steel plate size||effective size 2400mm x 1200 m|
|Steel plates thickness||3mm - 12mm, depends on the diameter & height|
|Coating thickness||0.25mm - 0.4mm, two coatings internal and external|
|Acid and alkalinity proof||standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14|
|Elastic||same as steel sheet, around 500KN/mm|
|Service life||>30 years|
|Spark test||>1500 V|
|Permeability||gas and liquid impermeable|
|Easy yo clean||smooth, glossy, inert, anti-adhesion|
|Corrosion resistance||excellent! Suitable for wastewater saltwater, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
Stainless steel Municipal Water tank is assembled by stainless steel plates, bolts, special sealant, etc. It is an innovation in the installation of stainless steel welded tanks. The tank uses SUS304, SUS316L, and SUS444 stainless steel plates, which meet the OCr18Ni19 sanitary inspection standards and have the characteristics of lightweight, low cost, sanitary and environmental protection.
Municipal Water tanks selection should be an important aspect of facility planning, and the support of an experienced and knowledgeable partner will significantly enhance the overall. Our Municipal Water tanks specialists are at the forefront of the industry in the engineering and construction of Municipal Water tanks. We design, manufacturer and install storage tanks to provide you with the most advanced Municipal Water storage solutions for the best value in the industry.
Contact Person: Miss.Melody wong