Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Adhesion:||3,450N/cm|
|Service Life:||≥30 Years||Steel Grade:||ART 310|
|Size Of Panel:||2.4M * 1.2M||Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14|
|Capactiy Available:||20 M3 To 20,000 M3||Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion|
|Steel Plates Thickness:||3mm - 12mm , Depends On The Diameter & Height||Usage:||Waste Water Treatment , Sewage Treatment, Effluent Treatment, Ect.|
|Easy To Cle:||Smooth, Glossy, Inert, Anti-adhesion||Warranty Period:||2 Years Free Of Charge|
|Impact Resistance:||Excellent||Foundation:||Concrete Or Glass Fused Steel|
|Installation:||By Jacking Machine Or Steel Pole, Fast In Installation||Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
|Defect Free:||Minimum Maintenance Needed||Corrosion Resistance:||Suitable For Waste Water Salt Water, Sea Water, High Sulfur Crude Oil, Salt Fox, Organic And Inorganic Compounds|
INDUSTRIAL AND COMMERCIAL WATER TANKS
Center Enamel has established itself in bolted steel commercial water tanks and industrial water tanks for more than 30 years and promise to supply quality bolted steel commercial water tanks and industrial water tanks.
Our bolted steel commercial water tanks and industrial water tanks are made of Glass-Fused-to-Steel.
Glass-fused-to-steel is the premium technology in the tank market. The enamel glass coated to the tanks forms a hard, inert barrier for both the interior and exterior tank surfaces to guard against weather and corrosion. Glass-fused-to-steel is impermeable to liquids and gas, offers excellent impact and abrasion resistance. Moreover, the color won't fade even after a lot years.
Center Enamel's bolted steel commercial water tanks and industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our bolted steel commercial water tanks and industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Comparison of various kinds of tanks
|Characteristic||Stainless steel||Carbon steel||FRP||Cement||Rubber/resin||Enamel|
|Easy to clean||Good||Normal||Very bad||Very bad||Very bad||Good|
|Heating||Allowed||Allowed||Not allowed||Not allowed||Not allowed||Allowed|
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61, API and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 45 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
GFS tank application
Contact Person: Miss.Melody wong