Payment & Shipping Terms:
|Coating Color:||Dark Green, Or Customizing Colors||Coating Thickness:||0.25~0.40mm, Double Coating|
|Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14||Adhesion:||3,450N/cm|
|Hardness:||6.0 Mohs||Holiday Test:||>1500V|
|Installation:||By Jacking Machine Or Steel Pole, Fast In Installation||Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion|
|Permeability:||Gas / Liquid Impermeable||Foundation:||Concrete Or Glass Fused Steel|
|Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
Customized Anaerobic Digestion Tanks With Super Corrosion Resistance
The anaerobic biogas digester is a process which decomposes and converts the organic waste into biogas gas, the biological process is called anaerobic digester. The digester reaction needs to do it in some conditions, the decomposition needs to accomplish in the absence of oxygen environment, airtightness environment will be selected as a reactor . In order to achieve full reaction agitator and heating system are required, there is also some temperature requirements during the reaction , mesophiles are most efficient at moderate temperature ranges between 25°C - 40°C while thermophiles run most efficiently at higher ranges between 45°C - 80° C.
Customized anaerobic digestion tanks are made of glass fused to steel which is superior in corrosion resistant as it is actually the combination of “ glass ” and “ steel “. So it has the advantages of both: superior corrosion resistance of glass, and strength and flexibility of steel. This is the combination of both to achieve the best . Glass fused steel tank is the best tank to be used as an anaerobic reactor, especially when the media inside than tank could be highly corrosive.
The high-temperature fusion of glass to steel fired at 800-950 degree results in an inert, durable finish. Applied to both interior and exterior, the GFS technology is able to withstand the rigorous of the construction site and provide many years of trouble-free service in harsh environments.
Specification of Anaerobic Digestion Tanks
1. Steel plates thickness: 3mm - 12mm, depends on the diameter & height
2. Coating thickness: 0.25mm - 0.4mm, two coatings internal and external
3. Acid and alkalinity proof: standard coating suits for PH3 - PH11, special
4. coating suits for PH1 - PH14
5. Adhesion : 3,450N/cm
6. Elastic: same as steel sheet, around 500KN/mm
7. Hardness: 6.0 Mohs
8. Service life : >30 years
9. Spark test : >1500 V
10. Permeability: gas and liquid impermeable
11. Easy yo clean: smooth, glossy, inert, anti-adhesion
Contact Person: Miss.Melody wong