Payment & Shipping Terms:
|Roof Available:||Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof||Chemical Resistance:||Excellent|
|Size Of Panel:||2.4M * 1.2M||Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion|
|Corrosion Resistance:||Suitable For Waste Water Salt Water, Sea Water, High Sulfur Crude Oil, Salt Fox, Organic And Inorganic Compounds||Applications:||Water , Waste Water, Digester , Reactor , Grain , Sludge , Chemicals|
GFS Industrial Water Tanks,
AWWA D103 Industrial Water Tanks,
customized Glass Fused Steel Tanks
High-Quality GFS Industrial Water Tanks For drinking water Storage Tanks
Center Enamel offers GFS industrial tanks for drinking water. The great advantage of storing drinking water in tanks is that the tanks are closed. GFS industrial water tanks for drinking water can be supplied in glass fused to steel. Drinking water tanks can also be supplied as underground tanks, avoiding the cost of buildings. The tanks can be produced in sizes from 20 to 25000m³.
We are specialists in the design, manufacture, and install storage tank products along with an installation and commissioning service for all tanks and associated equipment. With over 30 years of experience in the industry, Center Enamel has built up an encyclopedia of knowledge enabling us to satisfy the needs of any customer that requires advice on specific applications We provide an all-round first-class service so whatever your industry and whatever your tank requirements we will deliver.
GFS industrial water tank has become the premium water and liquid storage solution as below reasons:
1. Great volume: wide range of capacity of selection up to 20,000 m3.
2. Easy installed, expanded, dismantle, removed: The modular system allows not only fast rapid installation, expansion, or removed not subject to any weather, but also easily repaired.
3. Strong abrasion/corrosion resistance (PH1- 14 resistance): The strong bonding enamel coating not only can prevent the corrosion of tank, but also resistance to strong acid and strong alkali.
4. Suitable for various kinds of fields: Not only industrial effluent /Wastewater, sewage treatment, it also can be sued in power and energy, agriculture storage tanks, biogas digester.
5. Low project cost: as short construction, installed, the cost is much lower then other traditional tanks.
6. Long life service: More than 30 years of service life.
GFS Industrial Water Tanks Specifications
|Coating color||dark blue, dark green , white, and customized|
|A standard steel plate size||effective size 2400mm x 1200 m|
|Steel plates thickness||3mm - 12mm , depends on the diameter & height|
|Coating thickness||0.25mm - 0.4mm, two coating internal and external|
|Acid and alkalinity proof||standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14|
|Elastic||same as steel sheet, around 500KN/mm|
|Service life||>30 years|
|Spark test||>1500 V|
|Permeability||gas and liquid impermeable|
|Easy yo clean||smooth, glossy, inert, anti-adhesion|
|Corrosion resistance||excellent! Suitable for wastewater saltwater, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds|
About Center Enamel
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.
Contact Person: Miss.Melody wong
Acid and alkalinity proof: standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Usage: waste water treatment , sewage treatment, effluent treatment, ect.
Corrosion resistance: excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds
Spark test: >1500 V