Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Adhesion:||3,450N/cm|
|Service Life:||≥30 Years||Steel Grade:||ART 310|
|Roof Available:||Glass Fused Steel Roof , Membrane Roof, Aluminum Roof , GRP Roof||Size Of Panel:||2.4M * 1.2M|
|Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14||Capactiy Available:||20 M3 To 18,000 M3|
|Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion||Steel Plates Thickness:||3mm - 12mm , Depends On The Diameter & Height|
|Installation:||By Jacking Machine Or Steel Pole, Fast In Installation||Impact Resistance:||Excellent|
|Defect Free:||Minimum Maintenance Needed||Usage:||Waste Water Treatment , Sewage Treatment, Effluent Treatment, Ect.|
|Easy To Cle:||Smooth, Glossy, Inert, Anti-adhesion||Warranty Period:||2 Years Free Of Charge|
bolted steel water storage tanks,
welded steel tanks
Factory Coated Bolted Steel Leachate Storage Tanks Confirmed To AWWA Standard
Factory Coated Bolted Steel Leachate Storage Tanks Introduction
Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it.
When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the ground water.
There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operator’s first option is Center Enamel’s glass fused to steel leachate storage tanks.
Center Enamel Co., Ltd is a manufacturer dedicated in enameled products since 1989. We are not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia.
With over 30 years experience of enamel production and an area of 80, 000 square meters facility, Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Factory Coated Bolted Steel Leachate Storage Tanks and Additional Parts
Glass fused to steel leachate storage tanks are made of 3 parts as standard:
1. Glass fused to steel sheets
2. Special Sealant
3. Self-locking bolts
Below accessories could be optional by the customers:
Roofs / Manholes / Walkways / Working Platform / Ladders
Contact Person: Miss.Melody wong