Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Adhesion:||3,450N/cm|
|Steel Grade:||ART 310||Size Of Panel:||2.4M * 1.2M|
|Capactiy Available:||20 M3 To 20,000 M3||Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion|
|Easy To Cle:||Smooth, Glossy, Inert, Anti-adhesion||Warranty Period:||2 Years Free Of Charge|
|Impact Resistance:||Excellent||Installation:||By Jacking Machine Or Steel Pole, Fast In Installation|
|Chemical Resistance:||Excellent||Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14|
|FeatureEco-friendly:||Durability||Capactiy Availabl:||E20 M3 To 20,000 M3|
sludge holding tanks,
sewage storage tank
45000 gallon Industrial Water Storage Tanks and Commercial Water Tank
Glass-Fused-to-Steel is an advanced technology in the tank market. The Glass-Fused-to-Steel tank combines the strength and flexibility of the steel with the excellent corrosion resistance of the glass. All of our commercial water tanks are made of glass and are the perfect solution for industrial water storage.
Glass-Fused-to-Steel tank can be adapted to local environmental conditions such as high wind speed, snowfall or seismic loads. In addition, the choice of diameter and height is wide and the storage capacity exceeds 20,000 cubic meters.
Center Enamel Glass-Fused-to-Steel tank engineering design meets or exceeds the American Waterworks Association (AWWA D103-09 and EN / ISO28765:2011, and our GFS tank engineers carry out tank engineering calculations for each specific tank structure according to the project local Environmental conditions, such as snow loads, wind speeds, seismic belts, etc., to ensure a sufficiently safe long-term service life of the tank structure.
Our commercial water tanks are ideal for firewater, drinking water in urban areas, commercial rainwater harvesting, rainwater accumulation, and treated industrial water storage.
Comparison of various kinds of tanks
|Characteristic||Stainless steel||Carbon steel||FRP||Cement||Rubber/resin||Enamel|
|Easy to clean||Good||Normal||Very bad||Very bad||Very bad||Good|
|Heating||Allowed||Allowed||Not allowed||Not allowed||Not allowed||Allowed|
Contact Person: Miss.Melody wong
Acid and alkalinity proof: standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Usage: waste water treatment , sewage treatment, effluent treatment, ect.
Corrosion resistance: excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds
Spark test: >1500 V