Payment & Shipping Terms:
|Coating Thickness:||0.25mm~0.40mm & Double Coating||Adhesion:||3,450N/cm|
|Holiday Test:||>1500v||Elastic:||Same As Steel Sheet ,around 500KN /mm|
|Design Life:||50 Years||Tank Material:||Glass Fused To Steel|
glass fused to steel water tanks,
above ground fuel storage tanks
Glass Fused Steel Bolted Water Tanks comply with AWWA D103 / EN ISO28765 Standard
What’s Center Enamel Glass Fused To Steel Tanks?
Center Enamel is the leader in the bolted steel tank industry and the manufacturer of glass fused to steel tank. Center Enamel GFS Water Storage Tanks consist of glass fused to steel sheets, self - lock bolt and sealant, so it is also known as Glass Fused To Steel tank.
Since 1989, Center Enamel started to devote itself into enamel products industry, and its main products cover glass fused to steel tank / enamel bolted steel tank, and enamel cast iron cookware.
Center enamel has been engaged in enamel industry for more than 20 years, as the most professional enamel enterprise, process more than 200 patents of enamel frit formulas.
Manufactured in ISO9001 - 2008 certificated factory, Center Enamel’s enamel bolted steel tanks are strictly confirmed to AWWA D103 - 09 design standard, OSHA and meet ISO8765 and Australia design standards.
In the past 25 years development of the company, Center Enamel has successfully export and built more than 1000 tanks all around the world. Center Enamel is not only the first one to produce glass fused to steel tank in China, but also the largest and most professional glass fused to steel tank manufacturer in China.
Comparison between GFS Tanks and Concrete Tanks
1. Easy Construction: All the tank shells of Glass-Fused-To-Steel Tanks are factory coated, can be easily assembled and installed in difficult conditions, to meet the urgency requirement of project, unlike Concrete Tanks will be affected seriously by bad weather and other factors.
2. Corrosion Resistance: Concrete tank would corroded through to reinforcing bar within 5 years of installation, Glass-Fused-To-Steel Tanks with 2 layer of Glass coating, can be applied for PH from 3 to 11, Center Enamel also provide 2 Years Warranty of its Glass-Fused-To-Steel Tanks.
3. Leakage and Maintenance: Concrete is susceptible to cracking so that many Concrete Tanks show signs of visible leaks and require substantial remedial maintenance, Glass-Fused-To-Steel Tanks are an excellent alternative with less maintenance due to the steel strong tension strength.
Advantage of Center Enamel Co., Ltd
1. R & D ability:
With nearly 30 years experience in enameling industry, Center Enamel Co., Ltd has become the largest and most professional enamel tank manufacturer in China.
We already established a professional R & D team and advanced laboratory. With this strong enameling R & D ability, we can meet various demands of customers.
2. Professional R & D Team:
1 * Technical Consultant - National technical expert; Senior engineer; over 50 years enameling R&D experience
8 * Advanced Technician - Postgraduate educational background; expert in enamel R&D over 10 years
With various modern test instruments and equipment for about 100 sets
Specification of Center Enamel Glass Fused To Steel Tanks
|Coating Color||dark green, white, blue, color can be customized upon your request|
|Coating Thickness||0.25 - 0.40mm, double coating|
|Acid and alkalinity proof||Standard sheet PH: 3 - 11|
|Special sheet PH: 1 - 14|
|Adhesion||3450 N / cm|
|Elastic||Same as steel sheet, around 500 Kn / mm|
|Hardness||6.0 ( Mohs )|
|Service life||≥ 30 Years|
|Holiday test||> 1500 V|
|Permeability||Gas / liquid impermeable|
|Easy to clean||Smooth, glossy, inert, non adhesive|
suitable for waste water treatment, sewage treatment, effluent treatment
Contact Person: Miss.Melody wong
Acid and alkalinity proof: standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Usage: waste water treatment , sewage treatment, effluent treatment, ect.
Corrosion resistance: excellent ! Suitable for waste water salt water, sea water, high sulfur crude oil, salt fox, organic and inorganic compounds
Spark test: >1500 V