Product Details:
Payment & Shipping Terms:
|
Coating Thickness: | 0.35 Mm | Coating Color: | Customized |
---|---|---|---|
Roof Type: | Glass Steel Roof, Membrane Roof, Aluminum Roof, GRP Roof | Design According To: | AWWA D 103 , OSHA |
Tank Color: | Dark Green, Dark Blue, Light Blue And Customized | Tank Material: | Glass Coated Steel Sheets |
Capacity Range: | 20 M3 To 18,000 M3 | Service Life: | More Than 30 Years |
High Light: | anaerobic sludge digester,anaerobic digestion tanks |
USR Reactor enamel bolted Anaerobic Digester Tank
What is USR reactor ?
Using the USR process and the double membrane storage bad , the integrated enamel bolted USR reactor is an efficient integrated reactor. It is applying the process of the hierarchical fermentation , and it is a different sludge retention – time reactor . Especially when the low bacteria concentrated material is inputting in , the higher material utilization is obtained than the conventional anaerobic reactor by keeping the bacteria and sludge in the reactor longer . At the same time , the reactor also has several other advantages as an integrated reactor .
Brife introduction of enamel bolted tank
Glass fused steel tank is superior in corrosion resistant as it is actually the combination of “ glass ” and “ steel “ . So it has the advantages of both : superior corrosion resistant of glass , and strength and flexibility of glass . This is the combination of both to achieve the best . Glass fused steel tank is the best tank to be used as anaerobic reactor, especially when the media inside than tank could be highly corrosive.
We are the leader manufacturer of glass fused steel tank in China established in 1989 . Until now, we have built glass fused steel tanks in many countries including the United States and Australia and specially in Asia , and install more than 2000 tanks all over the world .
Enamel bolted tank specification
Coating color |
dark blue , dark green , white , and color can be customized |
A standard steel plate size |
effective size 2400mm x 1200mm , full size is 2450mm * 1250mm |
Steel plates thickness |
3mm - 12mm , depends on the diameter & height |
Coating thickness |
0.25mm - 0.4mm , two coating internal and external |
Acid and alkalinity proof |
standard coating suits for PH3 - PH11 , special coating suits for PH1 - PH14 |
Adhesion |
3,450N/cm |
Elastic |
same as steel sheet , around 500KN/mm |
Hardness |
6.0 Mohs |
Service life |
More than 30 years |
Comparation of various tanks
Characteristic |
Stainless steel |
Carbon steel |
FRP tank |
Cement |
Rubber/resin |
Enamel |
Abrasion resistance |
Normal |
Normal |
Bad |
Good |
Bad |
Good |
Corrosion resistance |
Good |
Bad |
Normal |
Bad |
Normal |
Good |
Impact resistance |
Good |
Good |
Normal |
Good |
Good |
Normal |
Insulation |
Bad |
Bad |
Good |
Good |
Good |
Good |
Easy to clean |
Good |
Normal |
Very bad |
Very bad |
Very bad |
Good |
Heating |
Allowed |
Allowed |
Not allowed |
Not allowed |
Not allowed |
Allowed |
Antistatic Property |
Bad |
Bad |
Good |
Good |
Good |
Good |
Contact Person: Ms. melody wong
Tel: 0086-18520168185
Fax: 86-020-34112006