Payment & Shipping Terms:
|Size Of Panel:||2.4M * 1.2M||Acid And Alkalinity Proof:||Standard Coating Suits For PH3 - PH11, Special Coating Suits For PH1 - PH14|
|Coating Thickness:||0.25mm~0.40mm , Two Layer Of Coating Internal And External||Tank Material:||Glass Fused To Steel|
|Steel Grade:||ART 310||Steel Plates Thickness:||3mm To 12mm , Depends On The Tank Structure|
bio digester tank,
biogas septic tank
Glass Fused Liquid to Steel Bio Energy Storage Tanks for Wet Anaerobic Digestion Treatment with Aluminum Covers
What is Glass Fused Liquid to Steel Biogas Storage Tanks?
Glass-Fused-to-Steel (GFS), also known as Glass-Lined-Steel (GLS), enamel tanks, these names all means the same thing. Is two materials - Enamel frit and raw steel are fused together after two coating and two heat treatment at 800-900℃ to achieve the best cohesion blending of the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments.
|Coating Color||Dark green, or Customizing colors|
|Coating Thickness||0.25~0.40mm, double coating|
|Acid and alkalinity proof||Standard pH: 3~11, Special pH: 1~14|
|Elastic||Same as steel sheet, around 500kN/mm|
|Service life||≥30 Years|
|Permeability||Gas liquid impermeable|
|Capacity||0-250 L, 250-500 L, 500-1000 L, 1000-5000 L, 5000-10000 L|
|Storage Material||Water, Chemicals/Oils, Milk/Dairy, Gases, Waste|
|Features||Leg Support, Horizontal Orientation, Vertical Orientation, Level Indicator Equipped, High Temperature Resistant|
Manholes Mixer flanges
Platforms Roof hatches
Biogas Storage Tank Benefits:
1.Long service life
2.Permanently gas tight
3.Suitable for heavy wind and snow loads
4.Low maintenance cost
Who we are?
Center Enamel Co., Ltd was established in 1989, is the pioneer and the largest manufacturer of glass fused to steel tanks in China. We design, manufacture and assemble glass lined steel-tanks, -silos and related accessories to the highest standards and in accordance with our customer's requirement.
- 1*Technical Consultant
National technical expert; Senior engineer; over 50 years enameling R&D experience
- 23*Advanced Technician
Postgraduate educational background; expert in enamel R&D over 10 years
- Raw material - enamel frit manufacturer
- CNC cutting machine for steel place
- Automatic enamel line for spray
- Raw Material Test: Raw material ingredient analysis, raw material impurity test and etc.
- Enamel Sample Test: Enamel fluidity test, color difference analysis, firing test, acid and alkali resistance test, adherence test
- Destructive Test: Impact test,holiday test, slice microscope analysis
- Numbering for each steel plate for tracking
Case location: China
Contact Person: Ms. melody wong