Payment & Shipping Terms:
|Tank Material:||Glass Fused To Steel||Foundation:||Concrete Or Glass Fused Steel|
|Steel Plates Thickness:||3mm To 12mm , Depends On The Tank Structure||Size Of Panel:||2.4M * 1.2M|
|Easy To Clean:||Smooth, Glossy, Inert, Anti-adhesion||Permeability:||Gas / Liquid Impermeable|
Anaerobic digestion is a kind of widely used renewable energy. The methane produced by this process consists of methane, carbon dioxide, hydrogen sulfide and other "pollutant" gases. This biogas can be used directly in cogeneration gas engines or can be upgraded to natural gas-quality biogas. The biogas slurry produced is also used as fertilizer.
Center Enamel glass fused to steel and stainless steel anaerobic digester tanks have been able to meet the design requirements of various anaerobic digestion process designers and equipment manufacturers. Our anaerobic digester tanks have been used for anaerobic applications, and the system runs in a medium or hot temperature configuration. Our anaerobic digester tanks can be fitted with concrete, bolts or welded floors.
Center Enamel's anaerobic digester tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our anaerobic digester tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Glass-Fused-to-Steel Anaerobic Digester tanks are fusing two materials at 820°C-930°C high temperature to achieve the best properties of both the strength and flexibility of steel and the corrosion of resistance of glass. Glass-Fused-to-Steel Anaerobic Digester tanks can provide many advantages over standard epoxy or welded painted storage tanks. Glass-Fused-to-Steel technology is the premium coating technology in the storage tanks market.
Glass Fused to Steel Anaerobic Digester Tanks Specifications
|Coating color||dark blue, dark green, white, and customized|
|A standard steel plate size||effective size 2400mm x 1200 m|
|Steel plates thickness||3mm - 12mm, depends on the diameter & height|
|Coating thickness||0.25mm - 0.4mm, two coatings internal and external|
|Acid and alkalinity proof||standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14|
|Elastic||same as steel sheet, around 500KN/mm|
|Service life||>30 years|
|Spark test||>1500 V|
|Permeability||gas and liquid impermeable|
|Easy yo clean||smooth, glossy, inert, anti-adhesion|
|Corrosion resistance||excellent! Suitable for wastewater saltwater, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
Stainless steel Anaerobic Digester tank is assembled by stainless steel plates, bolts, special sealant, etc. It is an innovation in the installation of stainless steel welded tanks. The tank uses SUS304, SUS316L, and SUS444 stainless steel plates, which meet the OCr18Ni19 sanitary inspection standards and have the characteristics of lightweight, low cost, sanitary and environmental protection.
Dry bulk storage tanks selection should be an important aspect of facility planning, and the support of an experienced and knowledgeable partner will significantly enhance the overall. Our dry bulk storage tanks specialists are at the forefront of the industry in the engineering and construction of dry bulk storage tanks. We design, manufacturer and install storage tanks to provide you with the most advanced dry bulk storage solutions for the best value in the industry.
Contact Person: Miss.Melody wong